Melbourne's
split system installation
experts

9438 4676

 
My Cart
0 item(s)

Mounting air conditioners on wall brackets

 


Why install on a wall bracket?


Unfinished surface

Suburb - Bacchus Marsh, Melbourne

There are different reasons as to why you might choose to install the outdoor unit on a wall bracket as oppossed to locating it on the ground.

In this installation it was decided to mount it up higher on a wall bracket because the owners were planning on putting a decking around the house at a later date. This eliminates the need to re-locate the unit later on or having to build the decking around it.

It also made sense to do it this way because the ground was not level and would have required significant leveling out.

It cost a little more to do it this way but the small upfront cost eliminated a potentioal problem later on.

Unit installed is the Samsung 8kw reverse cycle inverter with WiFi.

 

air conditioner on wall bracket

get a quote  Install prices

 


 

In a driveway

Suburb - Templestowe, Melbourne

Locating an air conditioner in a drive way is usually something we avoid. The last thing you want is a car to back in to or side swipe it. This install was replacing an old unit that had been installed there already and because the brick work recesses in about 400mm we decided to put the new one in the same area. One thing we did change however was the mounting of the air conditioner.

The old one was sitting on a concrete slab with only a couple of old bricks at one end to keep it level. It's a much better and safer solution to mount it on a wall bracket. It also keeps it up of the ground and stops the chance of rain water flowing down the driveway and into the unit. That might not happen alot but with a large downfall of rain it is certainly possible.

The great thing about wall brackets too are that they have a powder coating on them. That gives them a long rust free life span.

Some people also choose to mount units just off the ground in case they ever need to lay down pavers, or build a decking underneath. It saves having to come and de-commision the unit and then re-install it. It's not always necessary but is a handy option.

 

wall bracket just off ground

get a quote  Install prices

 


 

 

Above a walkway

Suburb - Rosanna, Melbourne

Originally the client suggested running the pipes down the wall and underneath the sloping walkway. The outdoor unit was to be located under there also but the ground below was uneven and there also was not much room. 

We suggested mounting the unit up on the wall bracket and the client was more than happy to do that. In fact they were unaware that was an option.

The unit was mounted high enough so the average person would be able to walk underneath it quite easily. The elderly gentleman who lives here wanted the unit at a height that would enable him to turn the isolating switch on and off by using a small ladder to reach.

Usually in a walkway we would mount the unit around 7 feet off the ground.

 

Installation on wall bracket - Rosanna

 

get a quote   Install prices

 


Above uneven ground

Suburb - Templestowe, Melbourne

If you are wanting to install a unit on uneven ground it can be worth mounting on a wall bracket. In this installation the ground is on a big slope and is also solid concrete.

Two reasons for mounting it on the wall bracket.

  • Rain water can flow down into the unit during heavy falls.
  • Making up a base to mount it on can get expensive

This was a cost effective way of dealing with both of those issues.

split system mounted above uneven ground

 

get a quote     Install prices

 


Above a garden bed

Suburb - Bayswater, Melbourne

This installation is a good example of the end result when you want the cheapest install you can get. It is in a lounge room that was right at the front door of the home. In our opinion it does not look the best in that location, but the client did  not want to spend the extra money it takes to move it to a more desirable location. That is all well and good, everyone has a budget.

In the end they decided to mount the unit on a wall bracket as they were planning on planting a graden bed that would hopefully disguse the unit more than it was at this point in time.

Of cousre, anything planted in front of it would die off pretty quick due to the warm and cold air that would be blowing out of the front of the unit during operation. Not sure how that ended up but we have had no complaints!

split system on wall bracket above garden bed

 

get a quote     Install prices

 

Content by Jason Tierney